Designing of the structured cable system network SCS for training center
details under the cut ..
DESIGNING OF STRUCTURED CABLE NETWORK SCS
1. All cable lines are laid covertly under a hemmed ceiling in voids behind wall cladding or in punctures in corrugated PVC pipes.
2. All cable lines must be marked.
3. Cable passage between floors is carried out in metal sleeves. The number and diameter of the sleeves is determined by the place.
4. The height of mounting and attachment of sockets are determined according to the project of the EOM and the design of the project. RJ45 sockets are mounted in a single frame with electrical outlets.
5. Wi-Fi access points are mounted covertly in the niche of the walls or behind the ceiling.
6. Provide for the possibility of maintenance or replacement of Wi-Fi points
3. The HDMI cable comes with soldered connectors and is not clipped. The excess cable is rolled up by a ring with a diameter of ~ 300-500 mm and fixed to the ceiling.
4. HDMI sockets (Kramer W-H) are disassembled, the standard plate is removed. In the blank insert (MTN464380), a mounting hole for the HDMI socket is drilled (sawed). The HDMI socket is attached to the insert (MTN464380) and inserted into the System-M inclined insert (MTN464614).
5. The height of mounting and attachment of sockets are determined according to the project of the EOM and the design of the project. RJ45 and HDMI sockets are mounted in a single frame with electrical outlets.
PROJECT DOCUMENTATION SCS
Download the project in the .dwg auto shell:
scs block diagram
wardrobe rack sks
scs network plan 1
plan
plan 3