Office steam room project
Design of a system of local air humidification in office premises for employees in order to maintain comfortable conditions and eliminate the negative effects of static electric charge accumulation. Everybody knows the feeling in the winter, when for no reason at all they are beaten with electric current from a crane, from a hanger, etc. We have implemented this project in terms of equipment installation, supply of steam generators and development of drawings.
Air humidifying design
This project provides indoor air moistening for the premises. Electrode steam humidifiers "CompactSteam CH", produced by "Carel", which have an elegant design, are convenient for installation in any types of premises, have a built-in steam distributor with adjustable flaps and a low-noise fan as humidifiers. All elements of hydraulic and electrical connections are completely hidden. The design features of these humidifiers include: proportional (0-10V) or modulating (20-100%) steam capacity control, automatic diagnostics of work with the output of digital codes and symbols on the display, automatic control of water salinity concentration and anti-foam system, remote control and alarm relay. The water level is maintained by two solenoid valves - at the inlet and at the water drain. The built-in fan only works when steam is generated.
The humidity control of the air is carried out with the help of the external electronic hygrostat "Carel CLIMA", which can control the compactSteam humidifier in proportional mode for more accurate maintenance of the required humidity. With the help of the "CLIMA" hygrostat, you can program the day and weekly operation of the humidifier, as well as adjust the humidity setpoint depending on the external climatic conditions. A safe power supply for the hygrostat (24 V) is supplied directly from the compactSteam humidifier.
As feedwater, drinking water is adopted. On the eyeliner is installed mechanical fine filter.
The drain pipe of the humidifier is connected to the condensate drain pipe from the fan coils through the hydraulic valve. The installation of a hydraulic lock, immediately after the drain pipe of the humidifier, is obligatory. In case of idle time of the humidifier for more than three days, for the purposes of hygiene, an automatic discharge of water occurs.
For transportation of feedwater and for drainage drainage, pipes made of Uponor Wirsbo cross-linked polyethylene are used. The temperature of the drained water 60 ° C.
Installation and connection of steam humidifiers according to the instructions of the supplier.