The design of interior decoration (architectural solutions) of training center
Our design company successfully completed the decoration and architectural design of the building of the training center in Moscow.
DESIGNING ARCHITECTURAL DECISIONS AR
6. Layout of ceramic tiles on floors and walls (seam), unless indicated otherwise in the drawing, start from the center of the doorway.
8. At the joints of floor coverings of different types and for the design of the junction of the floor covering to the wall of the ramp
showroom apply the profile of DPE 110-ZF company "DRAL" (T3), see the consolidated specification and designation in this drawing, or equivalent (contractor). Profile bend on the technology of the manufacturer along the radius of the ramp. Subscribe to agree with the architect. Around the entrance vestibule and
of the first flight of the ladder with axis 2, set the specified profile along the perimeter. Before entering the elevator, according to the Thysen Krup specification
Types of plating
1.Aab frameless plasterboard GKL on gypsum gypsum Super glue (1 sheet GKL)
1.Bob Facing on a metal frame made of profiles PP 60/27 and PPN 28/27 on straight lines
suspensions, plating 2 layers GCR
1.Bob1 Facing on a metal frame made of profiles PP 60/27 and PPN 28/27 on
direct hangers, plating 1 layer Gipton
1. Cob1 Unary frame made of Gyproc-Ultra profile, 50 mm wide, 600 mm profile pitch, HL
12.5 mm in two layers
1. Cob2 Unary frame from Gyproc-Ultra profile, 75 mm wide, 600 mm profile pitch, HL
12.5 mm in two layers
1.Dob Facing on a metal frame made of profiles PP 60/27 and PPN 28/27 on direct hangers, plating 1 layer Rigitone
Partition type
C Single frame from Gyproc-Ultra profile, 50 mm wide, 600 mm profile pitch, frame filling - ISOVER Sound Protection 50 / Е, Gyproc casing
D Single frame from Gyproc-Ultra profile, 50 mm wide, 600 mm profile pitch, frame filling - ISOVER Sound Protection 50 / Е, Gyproc casing
E Double frame from Gyproc-Ultra profile, 75 mm wide, 400 mm profile pitch, frame filling - ISOVER Sound Protection 75 / E, 12.5 mm GLC trim panel with two layers on each side.
1.1 Puttying, priming, painting with Ticurilla emulsion paint Joker.
Gyproc base, putty: Weber LR +, Weber Prime Multi. (Color RAL 000 90 00 (milky white))
1.8 Hard putty, primer, painting with Ticurilla emulsion paint Joker. Reason: Rigiton. , putty: Weber LR +, Weber Prime Multi. (Color RAL 000 45 00 (gray))
1.3 Puttying, priming, painting with Ticurillus Joker water-based paint. Gyproc base putty: Weber LR +, Weber Prime Multi. (Color RAL 000 45 00 (gray))
1.4 Puttying, priming, painting with Ticurilla paint with emulsion Joker Gypton base. Putty Weber LR +, Weber Prime Multi.
(Color RAL 000 45 000 (gray) - background color
1.5 Putty, primer, decorative painting Tikurilla Joker. Gyproc base (card substrate). Putty Weber LR +, Weber Prime Multi.
PROJECT DOCUMENTATION OF INTERNAL FINISHES OF ARCHITECTURAL PART
1.5 / 1 Putty, primer, decorative painting. Foundation of Gyproc.
Putty Weber LR +, Weber Prime Multi.
RAL 000 90 00 color (milky white) - background color, panel (infographics).
1.6 Putty primer, painting with Ticurilla Joker water-based paint. The base is a brick wall. Putty Weber LR +, Weber Prime Multi.
Color RAL 000 80 000 (light gray).
1.7 Puttying, glue, Weber LR +, Weber.vetonit Ultra fix glue, ceramic tile BLOOM SUPER WHITE RET 721732, 16.05 * 48.15 RAL 000 90 00. Giprok basis.
1.7 / 1 Putty, glue, Weber LR +, Weber.vetonit Ultra fix glue, BLOOM GREEN RET 721747 ceramic tile, 16.05 * 48.15 RAL 000 45 00. Giprok basis.
P.1 Stainless steel flat plinth 80mm Metal Line 790/8 SF